Vossenjacht pieper V1.1

Moderator: pe1br

Post Reply
pe1br
Posts: 66
Joined: Thu Apr 14, 2016 3:37 am

Vossenjacht pieper V1.1

Post by pe1br »





DB9 pin 1 microphone gnd
DB9 pin 2 Microphone
DB9 pin 3 PTT
DB9 pin 5 en 9 GND
DB9 pin 6 + 8 volt

door button S4 lang ingedrukt te houden kom je in een 2de menu, de rode led blijft nu branden.
Hier kun je de cal instellen voor de CW callgever:
  • button S1 spatie
    button S2 dot
    Button S3 dash
    Button S4 (lang vasthouden) terug naar normaal bedrijf
Eenmaal geprogrammeerd wordt de call in de EEprom van de Arduino opgeslagen en blijft er in staan.
Attachments
vossepieper-v1.1-Universeel.ino
(4.12 KiB) Downloaded 968 times
85ff3b24-0e1e-4cd6-a49f-3a88d8fa8e1b.jpeg
(248.93 KiB) Not downloaded yet
vossenjacht-pieper-v1-1.png
(8.58 KiB) Not downloaded yet
pe1br
Posts: 66
Joined: Thu Apr 14, 2016 3:37 am

Re: Vossenjacht pieper V1.1

Post by pe1br »

Yaesu



Pin 3 >> DB9 pin 6
Pin 4 >> DB9 pin 9
Pin 5 >> DB9 pin 2
Pin 6 >> DB9 pin 3
Attachments
rj6pin.jpg
(8.18 KiB) Not downloaded yet
pe1br
Posts: 66
Joined: Thu Apr 14, 2016 3:37 am

Re: Vossenjacht pieper V1.1

Post by pe1br »

Kenwood rond:



pin 1 >> DB9 pin 2
pin 2 >> DB9 pin 3
pin 5 >> DB9 pin 6
pin 7 >> DB9 pin 1
pin 8 >> DB9 pin 9
Attachments
kenwood-rond.png
(90.74 KiB) Not downloaded yet
pe1br
Posts: 66
Joined: Thu Apr 14, 2016 3:37 am

Re: Vossenjacht pieper V1.1

Post by pe1br »

Kenwood RJ45:



pin 2 >> DB9 pin 6
pin 3 >> DB9 pin 9
pin 4 >> DB9 pin 3
pin 5 >> DB9 pin 5
pin 6 >> DB9 pin 2
Attachments
kenwood rj45.png
(77.62 KiB) Not downloaded yet
pe1br
Posts: 66
Joined: Thu Apr 14, 2016 3:37 am

Re: Vossenjacht pieper V1.1

Post by pe1br »

Icom RJ45:

Image
PIN1 >> DB9 pin 6
PIN4 >> DB9 pin 3
PIN5 >> DB9 pin 1
PIN6 >> DB9 2
PIN7 >> DB9 9
Attachments
icom.jpg
(8.95 KiB) Not downloaded yet
Post Reply